Durability and Simplicity The frame is constructed of heavy 3/16" steel plate with double welded seams. The internally sealed body is also a 14 gallon hydraulic oil reservoir, keeping oil temperatures at a normal 150 degrees. The dependable tine drive hydraulic motor is directly mounted to the tine shaft, eliminating troublesome belts, chains and gears.
Transportable Our sturdy, specially designed tilt bed trailer makes it easy to move the BARRETO. Low trailer profile and positive locking devices allow the tiller to be loaded and transported safely and conveniently.
Low Maintenance Most moving parts are lubricated by hydraulic oil. Shafts and bearings are protected by seals and plates There are only three grease fittings on the entire machine. Pressure relief valves prevent damage when tines or wheels are blocked. Parts for the BARRETO are stocked at our modern plant, just a phone call away, and are delivered to you by UPS with next day air available.
Engine Options
Briggs and Stratton: Vanguard V-Twin, 16 HP
Honda: OHV GX 390, 13 HP
Hydraulic System:
Motors: Char-Lynn
Oil Capacity: 14 gallons
Filters: 10 micron cartridge and 100 mesh
sump screen
Controls:
Safety Clutch
Tines: forward and reverse
Wheels: variable speed forward and reverse
Axle:
Solid: double sealed, felt washer shielded
Drive:
#50 roller chain on keyed sprockets
Axle Bearings:
Bronze bushings
Tine Shaft Bearings:
Drive: double tapered roller
Outboard: double greasable ball
Speeds:
Wheels: 0-80 fpm w/engine @ 3500 rpm
Tines:
260 rpm w/engine @ 3500 rpm
Safety Features:
Safety Clutch: stops tines and wheels instantly Tines: lock out automatically with wheels in reverse
Fingertip controls are simple to understand and easy to operate for the inexperienced or professional user. Wheels and tines work independently of each other, allowing the wheels to travel at variable speed while engine and tines remain at full speed. Tines automatically stop when wheels are in reverse. A safety clutch on the handlebar prevents accidental injury.
A heavy duty dirt shield prevents wire, string and dirt from damaging the hydraulic tine motor seal. Inboard double tapered roller bearings and greasable outboard double ball bearings support tine shaft. Tines are hardfaced to give maximum service life. Simple, rugged construction is your guarantee of dependability.
Length:
Width:
Height:
Tine width:
Tine diameter:
Wheel width:
Weight:
Tiller
77"
27"
44"
20"
14.5"
23"
560 lb.